Bulletproof helmet FDK01-II type
(Can be customized according to customer requirements)
99-type police uniform dark blue or black
Length:246mm * Width: 225mm * Height: 171mm
The helmet consists of helmet shell, chin strap and helmet top suspension system.
2.0MM bulletproof steel plate
1.96kg (test results)
Chin belt device
The 45KG weight was hung in the center of the mandibular band. The attachment did not break or slip off within 3 minutes. The emergency trip was not disengaged and damaged.
Maximum deformation 10.5mm, residual deformation 4.3mm
The flame of the helmet will self-extinguishes within 5s
Front, back, left, right, top of the head
The helmet can effectively prevent the shooting of the 54 type 7.62mm pistol 51 type 7.62 mm pistol bullet (lead heart) within the specified range,the bulletproof level is two-level, shooting the bullet-proof helmet at 5M distance, the helmet should block the warhead in the case of 5 effective hits, The bullet mark height of the helmet shell is not more than 25MM, and there is no part falling off in the suspension buffer system after the test.
Immersion (maximum bullet height 7.5MM on the back)
High temperature (maximum bullet height 7.5MM on the back)
Low temperature (maximum bullet height 6.5MM on the back)
No cracks on the surface after the test Foaming Stratification can maintain secondary ballistic performance.
<< GA293-2001 bulletproof helmets and masks >>